ABS Jilin Petrochemical GE‑150
ABS Jilin Petrochemical GE‑150
Product Introduction ABS Jilin Petrochemical GE‑150 is a general‑purpose ABS resin. It delivers high gloss, high rigidity, good impact resistance and processing flowability, mainly processed by injection molding.
Main Applications
Electronic‑Electrical Housings: TV front covers, copier housings, telephone housings and other parts.
Automotive Parts: General automotive components, wheel‑cover parts.
Consumer Goods: Cosmetic cases, office supplies, toys, household articles.
Other Applications: Various electronic components.
Performance Parameters
| Property Category | Test Item | Test Condition / Standard | Typical Value | Unit |
|---|---|---|---|---|
| Physical Properties | Density | 23°C, ASTM D792 | 1.05 | g/cm³ |
| Melt Flow Rate (MFR) | 200°C/5.0 kg, ASTM D1238 | 2 | g/10min | |
| Melt Flow Rate (MFR) | 220°C/10.0 kg, ASTM D1238 | 22 | g/10min | |
| Mechanical Properties | Tensile Strength | ASTM D638 | 420 (≈41.2) | kgf/cm² (MPa) |
| Flexural Strength | ASTM D790 | 630 (≈61.8) | kgf/cm² (MPa) | |
| Flexural Modulus | ASTM D790 | 21000 (≈2060) | kgf/cm² (MPa) | |
| Izod Notched Impact Strength | 1/4",23°C, ASTM D256 | 18 | kg·cm/cm | |
| Izod Notched Impact Strength | 1/8",23°C, ASTM D256 | 20 | kg·cm/cm | |
| Rockwell Hardness | R‑Scale, ASTM D785 | R109 | R‑scale | |
| Elongation at Break | ASTM D638 | 20 | % | |
| Thermal Properties | Heat‑Deflection Temperature (HDT) | 1.8 MPa, unannealed, ASTM D648 | 88 (190) | °C (°F) |
| Heat‑Deflection Temperature (HDT) | 1.8 MPa, annealed, ASTM D648 | 99 (210) | °C (°F) | |
| Vicat Softening Temperature | ASTM D1525 | 105 | °C | |
| Other Properties | Flammability Rating | UL94,1.5 mm/1.6 mm | HB | ‑ |
Injection‑Molding Parameters
| Process Parameter | Recommended Range | Unit |
|---|---|---|
| Drying Temperature | 80‑90 | °C |
| Drying Time | 2‑4 | h |
| Barrel‑Rear Temperature | 180‑220 | °C |
| Barrel‑Middle Temperature | 190‑230 | °C |
| Barrel‑Front Temperature | 190‑230 | °C |
| Nozzle Temperature | 185‑235 | °C |
| Mold Temperature | 40‑70 | °C |
| Injection Pressure | Customized according to product structure | MPa |
| Holding Pressure | Customized according to product structure | MPa |
| Back Pressure | Customized according to product structure | MPa |
| Screw Speed | Customized according to product structure | rpm |
Note: All data above is for reference only.
