ABS Zhejiang Petrochemical ZA0210H

Product Introduction ABS Zhejiang Petrochemical ZA0210H is a general‑purpose injection‑molding ABS resin with high gloss, high rigidity and high flowability. It is suitable for components requiring good surface gloss, structural strength and high processing efficiency.

Main Applications

Home Appliance Industry: Refrigerator door handles, drawer guides, washing‑machine control‑panel frames, air‑conditioner outlet blades, vacuum‑cleaner housings and other parts.

Electronics & Electrical: Computer monitor housings, printer housings, internal supports and housings for small electronic devices, telephone housings, electrical‑product housings and other electronic components.

Automotive Interior: Instrument‑panel trim strips, door‑inner‑trim frames, storage boxes and other automotive interior parts.

Daily‑Use Articles: Plastic household goods such as clothes hangers and storage boxes, office‑stationery housings, toys and other products.

Performance Parameters

Property Category	Test Item	Test Condition / Standard	Typical / Range Value	Unit
Physical Properties	Density	ASTM D792	1.04‑1.05	g/cm³
	Melt Flow Rate (MFR)	220°C/10.0 kg, GB/T 3682.1	18‑24	g/10min
	Molding Shrinkage	ASTM D955	0.4‑0.7	%
Mechanical Properties	Tensile Strength	GB/T 1040.2, 50 mm/min	≥47	MPa
	Flexural Strength	GB/T 9341, 2 mm/min	≥68	MPa
	Flexural Modulus	GB/T 9341	≥2300	MPa
	Charpy Notched Impact Strength	23°C, GB/T 1043.1	≥16	kJ/m²
	Rockwell Hardness	R‑Scale, ASTM D785	R105‑R110	‑
Thermal Properties	Heat‑Deflection Temperature (HDT)	1.8 MPa, ASTM D648	85‑92	°C
	Vicat Softening Temperature	GB/T 1633	≥95	°C
Other Properties	Flammability Rating	UL94, 1.5 mm	HB	‑

Injection‑Molding Parameters

Process Parameter	Recommended Range / Description	Unit
Drying Temperature	80‑85	°C
Drying Time	2‑4	h
Barrel‑Rear Temperature	180‑200	°C
Barrel‑Middle Temperature	190‑220	°C
Barrel‑Front Temperature	200‑240	°C
Nozzle Temperature	210‑230	°C
Mold Temperature	40‑70 (commonly 50‑80)	°C
Injection Pressure	60‑100	MPa
Holding Pressure	30‑50	MPa
Screw Speed	≤80	rpm
Back Pressure	5‑10	MPa

Note: All data above is for reference only.