AABS Jilin Petrochemical 0215A
ABS Jilin Petrochemical 0215A
Product Introduction ABS Jilin Petrochemical 0215A is a high‑gloss general‑purpose injection‑molding ABS resin. Featuring balanced mechanical properties, good processing flowability and excellent surface appearance, it is widely used in multiple industries.
Main Applications
Electronics & Electrical: Housings for televisions, computer monitors, telephones, copiers, home‑appliance buttons, electrical‑product housings and other electronic parts.
Automotive Components: Automotive interior and exterior trim parts.
Home Appliances: Various home‑appliance components.
Consumer Goods: Toys, office supplies and household articles.
Performance Parameters
| Property Category | Test Item | Test Condition / Standard | Typical / Range Value | Unit |
|---|---|---|---|---|
| Physical Properties | Density | 23°C | 1.05 | g/cm³ |
| Melt Flow Rate (MFR) | 200°C/5.0 kg, ASTM D1238 | 20.0 | g/10min | |
| Gloss | ‑ | 96 | % | |
| Whiteness | ‑ | 88 | % | |
| Mechanical Properties | Tensile Strength | ASTM D638 | 52.0 | MPa |
| Flexural Strength | ASTM D790 | 91.0 | MPa | |
| Flexural Modulus | ASTM D790 | 2850 | MPa | |
| Izod Notched Impact Strength | 1/4", 23°C, ASTM D256 | 185 | J/m | |
| Rockwell Hardness | R‑Scale, ASTM D785 | R112 | ‑ | |
| Thermal Properties | Heat‑Deflection Temperature (HDT) | 1.8 MPa, ASTM D648 | 91 | °C |
Injection‑Molding Parameters
| Process Parameter | Recommended Range / Description | Unit |
|---|---|---|
| Drying Temperature | 80 | °C |
| Drying Time | 2‑4 (minimum 2‑4) | h |
| Barrel‑Rear Temperature | 180‑200 | °C |
| Barrel‑Middle Temperature | 190‑220 | °C |
| Barrel‑Front Temperature | 200‑230 | °C |
| Nozzle Temperature | 210‑230 | °C |
| Mold Temperature | 40‑80 (commonly 50‑80) | °C |
| Injection Pressure | 60‑100 | MPa |
| Holding Pressure | 30‑50 | MPa |
| Screw Speed | 30‑70 | rpm |
Note: All data above is for reference only.
