AS Qimei Zhenjiang PN‑118L150
AS Qimei Zhenjiang PN‑118L150
Product Introduction AS Zhenjiang Qimei PN‑118L150 is a high‑transparency, high‑rigidity acrylonitrile‑styrene copolymer (SAN) resin with excellent chemical resistance. It also delivers good heat resistance and easy processability.
Main Applications
Household & Electronic Appliances: Suitable for electrical sockets, housings, instrument casings, dashboards, battery boxes, storage‑battery enclosures, junction boxes, TV bases, cassette cases and transparent electrical panels. Reliable electrical insulation, mechanical strength and heat resistance meet performance requirements for these components.
Automotive Industry: Applied to automotive parts such as head‑lamp housings, rear‑view mirror housings and instrument panels.
Daily‑use & Consumer Goods: Cosmetic cases, tableware, food containers, cups, toothbrush handles, pen barrels, transparent household hardware articles and toys. High transparency and moderate strength make it fit for these end‑uses.
Industrial Components: Oil‑resistant mechanical parts, tractor fuel tanks, packaging containers, filter pipes, housing covers, various switches and push‑buttons.
Films & Packaging: Also applicable for film‑grade applications.
Performance Parameters
| Property Category | Test Item | Typical Value | Test Condition / Standard |
|---|---|---|---|
| Physical Properties | Density | 1.06 g/cm³ | ASTM D792, 23/23℃ |
| Melt Flow Rate (MFR) | 3.0 g/10min | 200°C / 5.0 kg, ASTM D1238 | |
| Melt Flow Rate (MFR) | 28 g/10min | 220°C / 10.0 kg, ISO 1133 | |
| Molding Shrinkage | 0.2‑0.7 % | ASTM D955 | |
| Mechanical Properties | Tensile Strength | 730 kg/cm² (approx.71.54 MPa) | ASTM D638 |
| Flexural Strength | 1030 kg/cm² (approx.101.01 MPa) | ASTM D790 | |
| Flexural Modulus | 3.6×10⁴ kg/cm² (approx.3528 MPa) | ASTM D790 | |
| Izod Notched Impact Strength | 2.0 kg·cm/cm (1/8"); 1.8 kg·cm/cm (1/4") | ASTM D256 | |
| Rockwell Hardness | M‑83 | ASTM D785 | |
| Elongation at Break | 3.0 % | ASTM D638 | |
| Thermal Properties | Heat‑Deflection Temperature (HDT) | 92 °C (un‑annealed); 101 °C (annealed) | 1.82 MPa, ASTM D648 |
| Vicat Softening Temperature | 106 °C | ASTM D1525 | |
| Other Properties | Flammability (UL 94) | HB (1.6 mm / 1/16") | UL 94 |
Injection‑Molding Parameters
| Process Parameter | Reference Range | Remarks & Instructions |
|---|---|---|
| Drying Treatment | 80℃, 2‑4 hours | AS resin is hygroscopic (equilibrium water absorption:0.66%). Sufficient drying is required (moisture content below 0.1% recommended), otherwise silver streaks and bubbles may occur on finished‑part surfaces. |
| Barrel Temperature | 200‑250℃ or 200‑270℃ | Slightly lower temperature is recommended for thick‑wall products to prevent material degradation. |
| Mold Temperature | 40‑80℃ | 50‑60°C for high‑precision parts; 60‑80°C for high‑gloss and high‑heat‑resistance requirements. Mold temperature directly affects appearance, shrinkage and warpage. |
| Injection Pressure | 350‑1300 bar | Adjust according to flow length and product structure. AS has slightly lower flowability than PS, so relatively higher injection pressure is needed. |
| Injection Speed | High‑speed injection | Beneficial for good surface gloss, color performance and minimizing weld‑lines. |
| Back Pressure | Moderate setting | Promotes uniform plasticization and degassing. |
| Runners & Gates | All conventional gate types | Proper gate dimension design is required to avoid streaks, burn marks and voids. |
Note: All data above is for reference only.
