EVA Yangzi‑BASF V6110M Resin
EVA Yangzi‑BASF V6110M Resin
Material Introduction: EVA Yangzi‑BASF V6110M is EVA resin with VA content approx.26.6% and melt flow index approx.5.9 g/10min. It delivers good performance in foaming property, flexibility, aging resistance, electrical insulation, transparency and processability.
Main Applications
Wire & cable: Insulation and sheath layers for low‑voltage cables, communication cables. Applied for special light‑transmissible cables due to high transparency. Can be used as cable shielding material to reduce external electromagnetic interference; also for foamed cable accessories such as filling strips and foamed tubes.
Foamed products: Foamed shoe‑sole materials, foamed cable accessories (filling strips, foamed tubes), offering lightweight, softness and cushioning performance.
Injection‑molded products: Toys, stationery, sports goods and other injection‑molded articles requiring transparency and flexibility.
Performance Parameters
| Performance Category | Test Item | Test Standard | Typical Value / Range | Unit |
|---|---|---|---|---|
| Basic Properties | VA Content | Q/3201‑BYC‑02.01 | 25.6‑28.4 (typical:26.6) |
%(wt) |
| Melt Index(190℃/2.16kg) | ISO 1133 | 5.6‑6.4 (typical:5.9) |
g/10min | |
| Density | ASTM D1505 | 0.941‑0.948 | g/cm³ | |
| Mechanical Properties | Tensile Yield Strength | ISO 527 | ＞3.0 | MPa |
| Elongation at Break | ASTM D638 / ISO 527 | 800 | % | |
| Flexural Modulus | ASTM D790 / ISO 178 | 142 | MPa | |
| Shore Hardness A | ASTM D2240 / ISO 868 | 84 | ‑ | |
| Shore Hardness D | ASTM D2240 / ISO 868 | 35 | ‑ | |
| Thermal Properties | Vicat Softening Temperature | ASTM D1525 / ISO 306 | 52‑64 | ℃ |
| Melting Point | ‑ | 75‑88 | ℃ | |
| Others | Oxidized & Colored Particles | Q/3201‑BYC‑02‑2005 | ≤7 (typical:0) | pc/kg |
Processing Technology
| Processing Method | Key Parameter | Recommended Range / Description | Important Reminder |
|---|---|---|---|
| Injection Molding | Barrel Temperature | 120‑180℃ | Strict temperature control! Avoid overheating‑caused degradation. Actual temperature depends on equipment and articles. |
| Mold Temperature | 20‑40℃ | ‑ | |
| Injection Pressure | approx.60 MPa for reference; adjust per grade & product | ‑ | |
| Resin Temperature | 185‑195℃ | ‑ | |
| Extrusion Molding (Sheet example) | Barrel Temperature | 110‑145℃ | Suitable for profiles, sheets and other extruded products. |
| Die Temperature | 130‑145℃ | ‑ | |
| Pull‑roll Temperature | 30‑60℃ | ‑ | |
| Cooling‑roll Temperature | 30‑40℃ | ‑ | |
| Foaming Molding | Processing Temperature | Adjust precisely according to foaming agent type and product requirements | Strict temperature control! Excessive temperature will cause premature decomposition of foaming agent or resin degradation. Foaming‑agent dosage shall be precisely controlled. |
Disclaimer: All above data is for reference only.
