MABS Dagu DG‑T513N
MABS Dagu DG‑T513N
MABS Tianjin Dagu DG‑T513N is a methyl methacrylate‑acrylonitrile‑butadiene‑styrene copolymer featured with high transparency, high gloss and high‑impact property. It also delivers good chemical resistance, favorable surface hardness and scratch‑resistance performance.
Main Applications
Consumer electronics: mobile‑phone protective cases, earphone supports, smart‑watch transparent covers. Home‑appliance components: coffee‑machine water tanks, juicer cups, air‑fryer viewing windows. Medical devices: nebulizer housings, test‑tube racks, disinfection containers. Packaging containers: cosmetic bottles & jars, gift boxes, transparent storage boxes. Stationery & toys: pen barrels, model components, transparent blind‑box parts.
Physical Properties
| Property Item | Test Standard | Unit | Typical Value | Remarks |
|---|---|---|---|---|
| Density | ISO 1183 | g/cm³ | 1.09 | Light‑weight material |
| MFR | ISO 1133 | g/10 min | 12 (220℃,10kg) | Medium‑high flowability |
| Light transmittance | ASTM D1003 | % | ≥90 | 2 mm thickness |
| Haze | ASTM D1003 | % | ≤2 | 2 mm thickness |
| Tensile strength | ISO 527 | MPa | 45 | Tensile strength at break |
| Flexural strength | ISO 178 | MPa | 70 | — |
| Flexural modulus | ISO 178 | MPa | 2200 | — |
| Notched impact strength | ISO 180/1A | kJ/m² | 25 (23℃) | Izod impact |
| HDT | ISO 75‑2 | ℃ | 85 (1.82 MPa) | Under load condition |
| Vicat softening point | ISO 306 | ℃ | 98 (Method B50) | — |
| Rockwell hardness | ASTM D785 | R‑scale | 110 | — |
| UL‑94 rating | UL 94 | — | HB | Non‑flame‑retardant grade |
Injection Molding Parameters
| Parameter | Setting Range | Optimization Suggestion |
|---|---|---|
| Drying condition | 80‑85℃ × 2‑4 h | Moisture ≤0.05% to avoid silver‑streaks & bubbles |
| Barrel‑rear temp. | 180‑190℃ | Segment temperature control to prevent degradation |
| Barrel‑middle temp. | 200‑210℃ | |
| Barrel‑front temp. | 210‑220℃ | |
| Nozzle temperature | 215‑225℃ | |
| Mold temperature | 50‑70℃ | Above 60℃ for better surface gloss |
| Injection pressure | 60‑100 MPa | Higher value for thin‑wall parts |
| Hold‑on pressure | 40‑60% of injection pressure | Avoid excessive hold‑on for internal‑stress reduction |
| Back pressure | 0.3‑0.7 MPa | Proper back‑pressure for uniform plasticization |
| Injection speed | Medium‑high speed | Fast filling to reduce flow marks; multi‑stage speed for complex geometry |
| Screw speed | 40‑70 rpm | Prevent shear‑overheating degradation |
| Cycle time | 20‑50 s | Adjust by wall‑thickness; cooling time accounts for 60% |
Note: All information above is for reference only!
