PC/ABS SABIC MC1300
PC/ABS SABIC MC1300
PC/ABS SABIC MC1300 is an alloy material specially engineered for electroplating applications. It combines good flowability, impact resistance and excellent plating performance.
Main Applications
Automotive exterior parts: grilles, door‑handles, decorative trims, etc. Automotive interior parts: various components requiring metallic‑finish decoration. Automotive lighting: lamp housings and related components.
Physical Properties
| Property Category | Test Item | Test Standard | Data | Unit |
|---|---|---|---|---|
| Physical Properties | Density / Specific Gravity | ASTM D792 | 1.10 | g/cm³ |
| Melt Flow Rate (MFR) | 260°C/5.0 kg, ASTM D1238 | 14 | g/10 min | |
| Mold Shrinkage (Flow, 3.20 mm) | Internal Method | 0.50‑0.80 | % | |
| Mold Shrinkage (Transverse, 3.20 mm) | Internal Method | 0.50‑0.70 | % | |
| Water Absorption (24 hr) | ASTM D570 | 0.10 | % | |
| Mechanical Properties | Tensile Modulus | ASTM D638 | 2140 | MPa |
| Tensile Strength (Yield) | ASTM D638 | 50.3 | MPa | |
| Tensile Strength (Break) | ASTM D638 | 44.1 | MPa | |
| Elongation at Break | ASTM D638 | 150 | % | |
| Flexural Modulus | ASTM D790 | 2070 | MPa | |
| Flexural Strength (Yield) | ASTM D790 | 72.4 | MPa | |
| Izod Notched Impact Strength (23°C) | ASTM D256 | 530 | J/m | |
| Izod Notched Impact Strength (-30°C) | ASTM D256 | 430 | J/m | |
| Thermal Properties | Heat‑Distortion Temperature (1.8 MPa, unannealed) | ASTM D648 | 98.9 | °C |
| Heat‑Distortion Temperature (0.45 MPa, unannealed) | ASTM D648 | 116 | °C | |
| Vicat Softening Temperature | ASTM D1525 | 112 | °C |
Processing Parameters
| Process Parameter | Unit | Recommended Value / Range |
|---|---|---|
| Drying Treatment | ||
| Drying Temperature | °C | 99‑104 |
| Drying Time | h | 3.0‑4.0 |
| Max. Allowable Moisture Content | % | 0.04 |
| Injection Molding Temperature | ||
| Rear Barrel Temperature | °C | 249‑282 |
| Middle Barrel Temperature | °C | 254‑288 |
| Front Barrel Temperature | °C | 254‑288 |
| Nozzle Temperature | °C | 260‑288 |
| Melt Temperature | °C | 260‑288 |
| Mold Temperature | °C | 77‑99 |
| Injection Parameters | ||
| Back Pressure | MPa | 0.345‑0.689 |
| Screw Speed | rpm | 40‑70 |
| Suggested Shot Volume | % | 30‑80 |
| Mold Parameter | ||
| Vent Depth | mm | 0.038‑0.076 |
Note: All information above is for reference only!
