PPS Polyplastics 0220A9
PPS Polyplastics (Japan) 0220A9
PPS Polyplastics 0220A9 is a high‑toughness polyphenylene sulfide engineering plastic with excellent overall performance. It features high impact strength, superior heat resistance and high flame retardancy.
Main Applications
Electrical‑Electronic Industry: transformer bobbins, high‑frequency coil bobbins, plugs, sockets, terminal blocks, contactor commutator segments and various precision components. Especially suitable for high‑temperature electrical components operating above 200 °C, such as brushes for generators and engines, starter coils, etc.
Automotive Industry: automotive functional parts including igniters, heaters, thermostats, lamp bases, bearings, clutches, transmissions, gearboxes, bearing brackets, exhaust system components and others.
Mechanical & Chemical Industry: wear‑resistant parts such as gears, bearings, pump housings, pump wheels, impellers, valves, bearing supports, piston rings and sealing materials; corrosion‑resistant components for chemical industry including reaction tanks, pipes, valves and chemical pumps.
Physical Properties
| Property Category | Test Item | Test Condition | Test Standard | Test Data | Unit |
|---|---|---|---|---|---|
| Physical Properties | Density / Specific Gravity | — | ISO 1183 | 1.35 | g/cm³ |
| Water Absorption | 23°C, 24 hr | ISO 62 | 0.02‑0.04 | % | |
| Molding Shrinkage‑Transverse Direction | 80℃×2 mmt | — | 1.35 | % | |
| Melt Viscosity | 310°C, 1000/sec | ISO 11443 | 500 | Pa·s | |
| Mechanical Properties | Tensile Strength | 23°C | ISO 527‑2 | 90 | MPa |
| Elongation at Break | 23°C | ISO 527‑2 | 15 | % | |
| Flexural Strength | 23°C | ISO 178 | 140 | MPa | |
| Flexural Modulus | 23°C | ISO 178 | 3800 | MPa | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 3.3 | kJ/m² | |
| Rockwell Hardness (M Scale) | — | ISO 2039‑2 | 95 | — | |
| Thermal Properties | Heat‑Distortion Temperature (HDT) | 1.8 MPa (1.82 MPa), unannealed | ISO 75‑2/A | 100 | °C |
| Linear Thermal Expansion Coefficient‑Flow Direction | — | ISO 11359‑2 | 4.0E‑5 | cm/cm/°C | |
| Linear Thermal Expansion Coefficient‑Transverse Direction | — | ISO 11359‑2 | 6.0E‑5 | cm/cm/°C | |
| Electrical Properties | Volume Resistivity | — | IEC 60093 | 2.0E+16 | Ω·cm |
| Surface Resistivity | — | IEC 60093 | 7.0E+16 | Ω | |
| Dielectric Constant | 1 kHz / 1 MHz | IEC 60250 | 3.6 | — | |
| Dielectric Breakdown Strength | 3.00 mm | IEC 60243‑1 | 19 | kV/mm | |
| Arc Resistance | — | ASTM D495 | 115 | sec | |
| Comparative Tracking Index (CTI) | — | IEC 60112 | 125 | V | |
| Flame Retardancy | UL Flammability Rating | 0.75 mm | UL 94 | V‑0 | — |
Injection Molding Parameters
Drying treatment: PPS shall be fully dried before processing. Recommended drying condition: 120‑140°C for 3‑4 hours.
Injection temperature: Molding temperature range: 285‑330°C.
Reference barrel temperature setting: ‑ Rear section: 280‑300°C ‑ Middle section: 300‑320°C ‑ Front section: 310‑330°C ‑ Nozzle: 310‑330°C
Mold temperature: Recommended mold temperature: 120‑150°C. Higher mold temperature contributes to better surface gloss and improved dimensional stability of molded parts.
Note: All information above is for reference only!
