POE ExxonMobil 6202FL
POE ExxonMobil 6202FL
POE ExxonMobil 6202FL is a high‑performance polyolefin elastomer. Its core features combine high elasticity and excellent processability, with good compatibility with a wide range of materials. The product complies with RoHS regulations, and grades available for food‑contact applications.
Main Applications
Films & Packaging: Cast film, blown film, laminated film, packaging materials, etc. Polymer Modification: Used as a toughener for polypropylene (PP) modification to improve the impact resistance of thermoplastics. Automotive Industry: Automotive interior and exterior components. Other Industrial & Consumer Goods: Non‑woven fabrics, personal hygiene products, wires and cables, as well as profiles, sheets and others.
Detailed Physical Properties
表格
| Property Category | Test Item | Data | Unit | Test Standard |
|---|---|---|---|---|
| Physical Properties | Density (23°C) | 0.863 | g/cm³ | ASTM D1505 |
| Melt Flow Rate (MFR) | 9.1 (190°C/2.16 kg) | g/10 min | ASTM D1238 | |
| Melt Flow Rate (MFR) | 20 (230°C/2.16 kg) | g/10 min | Internal Test Method | |
| Mechanical Properties | Flexural Modulus (1% Secant) | 12.3 | MPa | ASTM D790 |
| Tensile Strength (Break) | ＞5.50 | MPa | ASTM D638 | |
| Tensile Strength (100% Strain) | 1.93 | MPa | ASTM D638 | |
| Tensile Strength (300% Strain) | 2.10 | MPa | ASTM D638 | |
| Elongation at Break | ＞2000 | % | ASTM D638 | |
| Tear Strength (Die‑C) | 33.3 | kN/m | ASTM D624 | |
| Hardness | Shore A Hardness | 66 | — | ASTM D2240 |
| Thermal Properties | Vicat Softening Temperature | 48 | °C | Internal Test Method |
Processing Technology
Drying Treatment: POE generally has low moisture absorption and normally does not require drying. If the package is damaged or stored in humid conditions, dry at 70‑80°C for 2‑3 hours as needed.
Processing Temperature: It is recommended to set the initial temperature slightly above the melting point of the material. Adjust accordingly based on your processing method (e.g. extrusion, injection molding).
Injection Speed: Relatively high processing speed is applicable.
Mold Temperature: Slightly higher mold temperature and pressure are generally recommended during processing.
Note: All information above is for reference only!
