PLA Anhui Fengyuan Biochemical FY801
Anhui BBCA Biotech FY801
FY801 is a bio‑based biodegradable PLA resin. It is eco‑friendly, non‑toxic, antibacterial, flame‑retardant and features good biocompatibility. It can be completely degraded under industrial composting conditions.
Main Applications
High‑temperature Food Packaging: Microwave‑safe food containers (steam‑resistant up to 100 °C), coffee capsules. Electrical & Electronic: Charger housings, socket panels (V‑2 flame retardant rating). Medical Devices: Surgical instrument handles, sterilization trays (EO‑sterilization resistant). Automotive Parts: Interior clips, wire‑harness fasteners (short‑term heat resistance up to 110 °C).
Property Specifications
| Item | Parameter / Certification |
|---|---|
| Grade type | High‑heat‑resistant injection‑molding semi‑crystalline PLA |
| Bio‑based content | ≥95% (ASTM D6866) |
| Food‑contact compliance | FDA 21 CFR 177.1520, EU 10/2011, GB 4806.6 |
| Medical certification | ISO 10993‑5, passed cytotoxicity test |
| Degradation certification | OK Compost INDUSTRIAL (EN 13432) |
| Density | 1.25‑1.27 g/cm³ (ISO 1183) |
| Key features | High heat resistance (HDT＞110 ℃) · Fast‑crystallizing |
Mechanical Properties (23 ℃, 50%RH)
| Property | Test Standard | Unit | Typical Value | Remarks vs. general‑grade PLA |
|---|---|---|---|---|
| Tensile strength | ISO 527 | MPa | 65‑75 | +20 % vs. FY201 |
| Elongation at break | ISO 527 | % | 2.0‑4.0 | More brittle |
| Flexural modulus | ISO 178 | MPa | 3800‑4200 | Comparable to ABS |
| Izod notched impact strength | ISO 180 | kJ/m² | 2.5‑3.0 | Toughening modification required |
| Rockwell hardness (M‑scale) | ASTM D785 | — | 95‑100 | High surface rigidity |
Thermal & Crystallization Properties
| Property | Test Standard | Unit | Typical Value | Technical Notes |
|---|---|---|---|---|
| Melting point | ISO 11357 | ℃ | 170‑180 | Injection molding temperature ≥185 ℃ |
| Glass‑transition temperature | ISO 11357 | ℃ | 58‑62 | Higher than base‑grade PLA |
| Heat‑deflection temperature (1.82 MPa) | ISO 75 | ℃ | 110‑115 | Core advantage, boiling‑water resistant |
| Crystallinity (standard injection molding) | XRD | % | 45‑55% | Nucleating agent optimizes crystallization rate |
| Cold‑crystallization peak temperature | DSC | ℃ | 90‑100 | Fast‑crystallizing, half‑time:25 s |
Optical & Rheological Properties
| Property | Test Standard | Unit | Typical Value |
|---|---|---|---|
| Light transmittance (2 mm thickness) | ASTM D1003 | % | ≥88% |
| Haze | ASTM D1003 | % | ≤5.0% |
| Melt flow rate (210 ℃, 2.16 kg) | ISO 1133 | g/10min | 5‑8 |
| Melt viscosity (210 ℃, 1000 s⁻¹) | ISO 11443 | Pa·s | 600‑800 |
Processing Parameters
| Processing Stage | Process Parameter | Recommended Range | Unit |
|---|---|---|---|
| Pre‑treatment | Drying temperature | 55‑60 | °C |
| Drying time | 2‑4 | h | |
| Extrusion / Spinning | Barrel temperature (rear to front) | 170‑210 | °C |
| Melt temperature | ~190‑210 | °C |
All above data are for reference only.
需要我把TH801T(PBAT)、TH803S(PBS)、FY801、FY802、FY804做一份完整选型总表（中英）吗？
以上所有参数仅供参考！
